ANKLESHWAR GIDC · PHASE II · GUJARAT
Home / Register / Oxidizers & Specialty / Hydrogen Peroxide 50% (Stabilized)
PKG-CB / 06 UNIT 30 kg 30 kg HDPE UN 3H1 H2O2 · HDPE CARBOY NOT TO SCALE
Packaging schematic · not to scale ● Stock line
Dispatch record Ready stock
Hub
Phase II, Ankleshwar GIDC Terminal
Minimum order
1,000 kg (Vented Carboys) / 1 Dedicated IBC
Release
Lot COA before dispatch
Shelf life
12 months

Packaging drawings are schematic. The actual pack, liner and closure are confirmed on the proforma and may vary by source lot.

CAS 7722-84-1 Oxidizers & Specialty 2 grades Direct Integrated Chlor-Alkali & Peroxide Line

Hydrogen Peroxide 50% (Stabilized)

H2O2 · MW 34.014 g/mol · Clear

Supplied as clear, colorless liquid with faint pungent odor at a guaranteed assay of ≥ 50.0% w/w H2O2. Available in 2 grades and 2 standard pack configurations, with lot-specific analytical release from the Ankleshwar terminal.

Commercial synonyms

H2O2 50%PerhydrolActive Oxygen BleachOxidant 50
Standard assay
≥ 50.0% w/w H2O2
Hazard class
Class 5.1 (Oxidizing Agent) + Class 8 (Corrosive)
UN transport
UN 2014 (HYDROGEN PEROXIDE, AQUEOUS SOLUTION 20-60%)
Pack formats
2 standard
Dispatch
24 hr stock release
Documentation
COA + SDS + invoice
● In stock GST invoice Weighbridge slip Hazira / JNPT export
01 Technical data sheet

The analytical limits, line by line.

Guaranteed specification limits for the standard grade, with the method used to verify each parameter. The lot COA reports the measured result against these limits.

How lots are released
Document TDS-HYDROGEN-PEROXIDE-50-2026 Revision 04 Issued 06 Nov 2026 Controlled copy
Analytical parameter Guaranteed specification Method
Physical appearance Water-white clear liquid, free from suspended matter Visual / reference standard
Chemical assay (dry basis) Min. 50.00% - 50.50% w/w H2O2 Potentiometric titrimetry / GC
Moisture / water content Balance aqueous (approx. 50%) Karl Fischer coulometry / loss on drying
Insoluble matter Nil Gravimetric micro-filtration
Chlorides (as Cl) Max. 5 ppm Turbidimetric spectrophotometry
Sulphates (as SO4) Max. 10 ppm Turbidimetric precipitation / ICP-OES
Iron (as Fe) Max. 0.5 ppm (stabilized against catalytic decomposition) Atomic absorption spectrometry
Heavy metals (as Pb) Max. 1 ppm ICP-MS
pH value 1.5 - 3.5 (standard stabilized pH range) Calibrated glass-electrode meter @ 25°C
Boiling point 114 °C (50% solution) Distillation thermometry
Specific gravity / density 1.196 - 1.200 @ 20°C Precision pycnometer @ 20°C
Solubility profile Completely miscible with water in all proportions Ph. Eur. / BIS solubility screen

Need the signed document? The full TDS and a current lot COA are issued by the technical desk. State the grade, pack and destination so the correct revision is attached.

Request TDS + COA
02 Application

Where Hydrogen Peroxide 50% earns its place.

The commercial functions this grade supports, and the process reason it is specified rather than a substitute.

APP-01

Textile Fiber Bleaching & Desizing

Delivers high whiteness index on cotton yarns and knitted fabrics without generating toxic chlorinated organo-compounds (AOX), breaking down purely into water and oxygen.

APP-02

Fenton Advanced Wastewater Oxidation

Generates powerful hydroxyl radicals (•OH) in combination with ferrous catalysts to destruct recalcitrant COD, phenols, and colorants in industrial effluent plants.

APP-03

Epoxidation & Fine Organic Synthesis

Serves as an environmentally benign oxygen transfer donor in the commercial synthesis of epoxidized soybean oil (ESBO), amine oxides, and peroxy-acids.

03 Packaging

Packs that fit the plant.

P01

30 kg / 50 kg HM-HDPE Carboys with vented degassing caps

UN-rated closure · tamper-evident seal

Stock
P02

1,100 kg IBC Totes (Vented)

UN-rated closure · tamper-evident seal

On order

Custom packing

Private-label bags, customer-specified liners and returnable IBC programmes are available for annual volumes. Trial lots can be supplied in 500 g to 5 kg sample packs.

04 Handling & hazard

Respect the label.

GHS signal word

DANGER

Class 5.1 (Oxidizing Agent) + Class 8 (Corrosive)

Hazard statements

  • H272: May intensify fire; oxidizer
  • H302: Harmful if swallowed
  • H314: Causes severe skin burns and eye damage
  • H332: Harmful if inhaled

Required PPE

  • Chemical splash goggles
  • Butyl rubber gloves (do not use cotton or leather)
  • Polyethylene protective suit
  • Emergency drench shower within 5 meters

Storage & compatibility

MUST be stored only in dedicated, vented containers in a cool, covered, dedicated oxidizer bay. Never plug or seal degassing vents. Keep away from combustible matter, heat, and direct sunlight.

Incompatible: Transition metals (Fe, Cu, Ni, Cr, Mn catalysts) · Organic combustibles, solvents, fuels · Dust and reducing agents.

Shelf life: 12 months with active decomposition rate < 1% per annum when stored at < 30°C

05 Supply & logistics

From the terminal to the plant.

The commercial path for this line: stock release from Ankleshwar, domestic road freight, or export stuffing through Hazira, JNPT or Mundra.

Terminal & transit detail
Minimum order
1,000 kg (Vented Carboys) / 1 Dedicated IBC
Dispatch hub
Phase II, Ankleshwar GIDC Terminal
Stock release
Within 24 hours of document clearance
Export gateways
Hazira 75 km · JNPT 320 km · Mundra 440 km

LOG-01 / Load estimator

Packaging & container load

Calculates units, pallets, gross weight and 20ft FCL utilisation from the selected pack.

20 MT / 20000 kg
1 MT min.20ft FCL ≈ 20–22 MT50 MT
Pack format
Consignment output Dispatch ready

Units required

667

30 kg

Gross weight

21.08MT

21,077 kg incl. tare

Pallets

24

1.2 × 1.0 m standard

20ft FCL utilisation1.04 × FCL · 100%
0 MTPayload limit ≈ 21.5 MT

Dispatch from Ankleshwar GIDC; container stuffing via the Hazira partner CFS. Bulk tankers of 20–30 MT cover Gujarat, Maharashtra and Madhya Pradesh.

Carry this specification into an RFQ
Line-specific questions

Hydrogen Peroxide 50% — buyer questions

Documentation, pack choice, storage and custom specifications for this line.

Ask the technical desk
01 What documentation ships with Hydrogen Peroxide 50% (Stabilized)?

Every dispatch carries a lot-specific certificate of analysis, the current safety data sheet revision, a GST tax invoice, a packing list and the origin weighbridge slip. Export consignments add an IMDG declaration and, on request, a certificate of origin. The COA is issued against the actual batch number and retained in our archive for twelve months.

02 Which pack format should we specify?

Stock options for this line include 30 kg / 50 kg HM-HDPE Carboys with vented degassing caps; 1,100 kg IBC Totes (Vented). Trial work usually starts with a carboy or drum; production volumes move to IBCs, jumbo bags or tankers where the product and site permit. The load estimator below converts tonnage into units, pallets and container utilisation for each pack.

03 How should Hydrogen Peroxide 50% (Stabilized) be stored?

MUST be stored only in dedicated, vented containers in a cool, covered, dedicated oxidizer bay. Never plug or seal degassing vents. Keep away from combustible matter, heat, and direct sunlight. Recommended shelf life: 12 months with active decomposition rate < 1% per annum when stored at < 30°C. Incompatible materials include Transition metals (Fe, Cu, Ni, Cr, Mn catalysts); Organic combustibles, solvents, fuels; Dust and reducing agents.

04 Can you supply against a customer-specific specification?

Yes, for repeat volumes. Send the assay, moisture, trace-metal and packing limits to the technical desk. We check them against the source plant’s capability, run a trial lot where needed, and hold the agreed limits in the annual supply agreement. Standard stock material remains available in parallel.

07 Procurement desk

Put a specification in front of a person.

Three short steps — product, volume, company — route your requirement to the Ankleshwar desk with the grade and packing already attached. Quotes are issued against a real lot, not a price list.

Response

Formal proforma within one business day for stock lines.

Samples

Technical trial samples with COA and SDS on request.

Monday – Saturday: 08:30 AM to 07:30 PM IST

RFQ / commercial desk

Request for quotation

  1. 01
  2. 02
  3. 03

Step 01 / Specification

Chemical & grade

CAS
7722-84-1
Assay
≥ 50.0% w/w H2O2
Formula
H2O2
Dispatch
Ankleshwar GIDC
Commercial desk · APEX CHEMTECHQuotation · COA · SDS