ANKLESHWAR GIDC · PHASE II · GUJARAT
Home / Register / Acids & Inorganics / Food Grade Phosphoric Acid 85%
PKG-CB / 04 UNIT 35 kg 35 kg HDPE UN 3H1 H3PO4 · HDPE CARBOY NOT TO SCALE
Packaging schematic · not to scale ● Stock line
Dispatch record Ready stock
Hub
Phase II, Ankleshwar GIDC Terminal
Minimum order
1,000 kg (Carboys/Drums) / 1 IBC Tote
Release
Lot COA before dispatch
Shelf life
36 months under recommended warehouse conditions

Packaging drawings are schematic. The actual pack, liner and closure are confirmed on the proforma and may vary by source lot.

CAS 7664-38-2 Acids & Inorganics 2 grades

Food Grade Phosphoric Acid 85%

H3PO4 · MW 97.994 g/mol · Crystal-clear

Supplied as crystal-clear, odorless, water-white syrup liquid at a guaranteed assay of ≥ 85.0% H3PO4. Available in 2 grades and 3 standard pack configurations, with lot-specific analytical release from the Ankleshwar terminal.

Commercial synonyms

Orthophosphoric AcidE338 Food AcidulantPhosphoric Acid FCC
Standard assay
≥ 85.0% H3PO4
Hazard class
Class 8 (Corrosive Liquid, Packing Group III)
UN transport
UN 1805 (PHOSPHORIC ACID, SOLUTION)
Pack formats
3 standard
Dispatch
24 hr stock release
Documentation
COA + SDS + invoice
● In stock GST invoice Weighbridge slip Hazira / JNPT export
01 Technical data sheet

The analytical limits, line by line.

Guaranteed specification limits for the standard grade, with the method used to verify each parameter. The lot COA reports the measured result against these limits.

How lots are released
Document TDS-PHOSPHORIC-ACID-FOOD-GRADE-2026 Revision 04 Issued 06 Nov 2026 Controlled copy
Analytical parameter Guaranteed specification Method
Physical appearance Clear, colorless, syrupy liquid without suspended matter Visual / reference standard
Chemical assay (dry basis) Min. 85.00% - 85.50% w/w H3PO4 Potentiometric titrimetry / GC
Moisture / water content Balance aqueous (approx. 15%) Karl Fischer coulometry / loss on drying
Insoluble matter Nil / Clear solution Gravimetric micro-filtration
Chlorides (as Cl) Max. 5 ppm (as Cl) Turbidimetric spectrophotometry
Sulphates (as SO4) Max. 30 ppm (as SO4) Turbidimetric precipitation / ICP-OES
Iron (as Fe) Max. 5 ppm (as Fe) Atomic absorption spectrometry
Heavy metals (as Pb) Max. 2 ppm (Food safety limit) ICP-MS
pH value < 1.0 (strongly acidic) Calibrated glass-electrode meter @ 25°C
Boiling point 158 °C (85% solution) Distillation thermometry
Specific gravity / density 1.685 - 1.690 @ 20°C Precision pycnometer @ 20°C
Solubility profile Miscible in water and alcohol in all proportions Ph. Eur. / BIS solubility screen

Need the signed document? The full TDS and a current lot COA are issued by the technical desk. State the grade, pack and destination so the correct revision is attached.

Request TDS + COA
02 Application

Where Food Grade Phosphoric Acid 85% earns its place.

The commercial functions this grade supports, and the process reason it is specified rather than a substitute.

APP-01

Carbonated Beverage & Food Processing

Imparts characteristic tangy acidity and inhibits microbial deterioration in colas, carbonated drinks, processed cheese, and dairy applications complying with FSSAI/FCC regulations.

APP-02

Cane Sugar Refining & Flocculation

Acts as a critical clarifying reagent (phosphofloatation) by precipitating insoluble calcium phosphate complexes that trap non-sugar colorants and colloidal impurities.

APP-03

Fermentation & Biological Nutrients

Supplies essential phosphorus for yeast cell wall synthesis and energy ATP generation during bio-ethanol, enzyme, and antibiotic fermentation batches.

03 Packaging

Packs that fit the plant.

P01

35 kg HM-HDPE Carboys

UN-rated closure · tamper-evident seal

Stock
P02

300 kg UN-Rated HM-HDPE Drums

UN-rated closure · tamper-evident seal

On order
P03

1,600 kg Intermediate Bulk Containers (IBC)

UN-rated closure · tamper-evident seal

On order

Custom packing

Private-label bags, customer-specified liners and returnable IBC programmes are available for annual volumes. Trial lots can be supplied in 500 g to 5 kg sample packs.

04 Handling & hazard

Respect the label.

GHS signal word

DANGER

Class 8 (Corrosive Liquid, Packing Group III)

Hazard statements

  • H314: Causes severe skin burns and eye damage
  • H290: May be corrosive to metals

Required PPE

  • Chemical splash safety goggles
  • Acid-resistant nitrile or PVC gloves
  • Rubber apron
  • Face shield during bulk pumping

Storage & compatibility

Store in dedicated food-grade acid storage tanks or sealed HDPE carboys/IBCs. Ambient temperature 15°C to 30°C. Protect from freezing (crystallizes at ~21°C for 85%).

Incompatible: Strong bases and caustic solutions · Cyanides and sulfides (releases toxic gases) · Mild steel and cast iron.

Shelf life: 36 months under recommended warehouse conditions

05 Supply & logistics

From the terminal to the plant.

The commercial path for this line: stock release from Ankleshwar, domestic road freight, or export stuffing through Hazira, JNPT or Mundra.

Terminal & transit detail
Minimum order
1,000 kg (Carboys/Drums) / 1 IBC Tote
Dispatch hub
Phase II, Ankleshwar GIDC Terminal
Stock release
Within 24 hours of document clearance
Export gateways
Hazira 75 km · JNPT 320 km · Mundra 440 km

LOG-01 / Load estimator

Packaging & container load

Calculates units, pallets, gross weight and 20ft FCL utilisation from the selected pack.

20 MT / 20000 kg
1 MT min.20ft FCL ≈ 20–22 MT50 MT
Pack format
Consignment output Dispatch ready

Units required

572

35 kg

Gross weight

21.05MT

21,050 kg incl. tare

Pallets

24

1.2 × 1.0 m standard

20ft FCL utilisation0.95 × FCL · 95%
0 MTPayload limit ≈ 21.5 MT

Dispatch from Ankleshwar GIDC; container stuffing via the Hazira partner CFS. Bulk tankers of 20–30 MT cover Gujarat, Maharashtra and Madhya Pradesh.

Carry this specification into an RFQ
Line-specific questions

Food Grade Phosphoric Acid 85% — buyer questions

Documentation, pack choice, storage and custom specifications for this line.

Ask the technical desk
01 What documentation ships with Food Grade Phosphoric Acid 85%?

Every dispatch carries a lot-specific certificate of analysis, the current safety data sheet revision, a GST tax invoice, a packing list and the origin weighbridge slip. Export consignments add an IMDG declaration and, on request, a certificate of origin. The COA is issued against the actual batch number and retained in our archive for twelve months.

02 Which pack format should we specify?

Stock options for this line include 35 kg HM-HDPE Carboys; 300 kg UN-Rated HM-HDPE Drums; 1,600 kg Intermediate Bulk Containers (IBC). Trial work usually starts with a carboy or drum; production volumes move to IBCs, jumbo bags or tankers where the product and site permit. The load estimator below converts tonnage into units, pallets and container utilisation for each pack.

03 How should Food Grade Phosphoric Acid 85% be stored?

Store in dedicated food-grade acid storage tanks or sealed HDPE carboys/IBCs. Ambient temperature 15°C to 30°C. Protect from freezing (crystallizes at ~21°C for 85%). Recommended shelf life: 36 months under recommended warehouse conditions. Incompatible materials include Strong bases and caustic solutions; Cyanides and sulfides (releases toxic gases); Mild steel and cast iron.

04 Can you supply against a customer-specific specification?

Yes, for repeat volumes. Send the assay, moisture, trace-metal and packing limits to the technical desk. We check them against the source plant’s capability, run a trial lot where needed, and hold the agreed limits in the annual supply agreement. Standard stock material remains available in parallel.

07 Procurement desk

Put a specification in front of a person.

Three short steps — product, volume, company — route your requirement to the Ankleshwar desk with the grade and packing already attached. Quotes are issued against a real lot, not a price list.

Response

Formal proforma within one business day for stock lines.

Samples

Technical trial samples with COA and SDS on request.

Monday – Saturday: 08:30 AM to 07:30 PM IST

RFQ / commercial desk

Request for quotation

  1. 01
  2. 02
  3. 03

Step 01 / Specification

Chemical & grade

CAS
7664-38-2
Assay
≥ 85.0% H3PO4
Formula
H3PO4
Dispatch
Ankleshwar GIDC
Commercial desk · APEX CHEMTECHQuotation · COA · SDS